There is an operating panel with LCD display on the front side of MiniSuperPLC. You can directly edit the control program for MiniSuperPLC by using the operating keys on this panel. This liquid crystal programming panel is removable, and it can be deviated from the PLC by the private interface wire MiniSuperPLC-EHC to realize the remotely programming. It can be flexibly set up according to your needs. When needed, it can be plugged in. When not needed, it can be removed and replaced with an ordinary front cover MiniSuperPLCPC.

Thus the cost can be widely reduced.

Warning - SWRT panel shall be plugged in or removed only after AC or DC power has been turned off.

2. Flexible Human-PLC Interface (SHMI)

Comparison with conditional LCD, we provide with 64 human-PLC interfaces. When using SHMI, users can add the human-PLC interfaces no more than 64 according to the demand. On the LCD it will display the following data, such as time, status of input & output, counter, timer, analog and so on information. When using, user can modify, add or delete the interface. Thus a free and easily using LCD function block is given to the user.

3. Well-featured and compact design If you are thinking of improving the application of your equipment, MiniSuperPLC provides very many features. MiniSuperPLC is very compact.

71mm*106mm*67mm (12-point main PLC/voice module)

126mm*106mm*67mm (22-point main PLC/20-point extension module /remote control receiver)

4. With the function blocks used for programming, the program storage capacity of MiniSuperPLC is large.

The control functions of MiniSuperPLC can be implemented only with function blocks incorporated into a function block diagram. The same level of control implemented by a conventional PLC would require a much larger and more detailed program. When several function blocks are linked together in a specific way, then relatively complicated control functions can be implemented. MiniSuperPLC has a storage capacity of programs for up to 128 function blocks. There is a large application resource to satisfy the requirements for complicated control. A program, when downloaded into MiniSuperPLC will never be lost, as MiniSuperPLC does not rely on a battery for the memory function.

5. External Extendable Input/output

MiniSuperPLC series PLC can be connected with the relative MiniSuperPLC-20E Extension Module. Thus it can be extension to 20 points input/output once (12 points input and 8 points output). One set of MiniSuperPLC series PLC can be externally connected with 5 extension modules. Thus 22 points PLC can be extension to 122 points input/output (74 points input and 48 points output). And it gives you a large storage capacity of your control.

Note:  One MiniSuperPLC main PLC can be connected with 5 extension modules at most. Two extension modules are recommended to connect with one MiniSuperPLC main PLC. Otherwise the speed of the running will be slow.

6. Real time clock function

MiniSuperPLC series intelligent controller has the real time clock recording function. It canrun and time according to the random time of your desiring and the accuracy can reach second, which make your control of time be correct and accurate. And you can set 127 periods of different time. It is suitable for the system that needs the time control.

7. Analog input and transmission (The IA ports of DC type main PLCs have the analog input function.)

In addition to receiving a switching input, MiniSuperPLC can also receive the analog input to implement the control of temperature, humidity, pressure, flow, level unit, etc., and transmit them remotely to a computer for monitoring.

8. Security cipher code function

MiniSuperPLC is provided with protection for the programs downloaded into it. A security cipher code can be set before programs are written. The programs can then only be modified after the correct cipher code is entered.

9. Telephone function

MiniSuperPLC is equipped with telephone and voice function blocks. It is possible to dial directly through a telephone line after the required telephone number has been preset.

MiniSuperPLC can be dialed automatically, when the conditions are satisfied so as to implement advice or alarm functions. Moreover, MiniSuperPLC can also receive remote signals transmitted through a telephone line in order to control the terminal equipment.

Note:  It is necessary to configure MiniSuperPLC-VPA/VPD multifunctional voice block for the implementation of telephone function and voice function.

10. Wireless Control

Wireless control functions can wirelessly remote control the MiniSuperPLC to realize the control to the voice module, input/output. This function can be used in some specific control site, such as the control to the start and stop of MiniSuperPLC with no means by hands, or control the MiniSuperPLC at site in the working house. Using wireless control module it will be readily solved. In general, wireless control function can make it convenient to realize the control to the MiniSuperPLC.

11. Voice function

MiniSuperPLC can provide voice recording and broadcasting back functions for the automatic control industry, creating intelligent controls, which can give audible voice outputs, both locally and through remote speakers.

12. Function Keys

32 function keys are provided. The function of these keys is the same as IN (Input I0-In), relatively the same as the soft switch. On the LCD panel, all the defined function keys are displayed. Also the explanation and the password protection function of each  function key can be show in Super Relay Logic. The Super Relay Logic provides 8 function keys pages and in each page there may be 4 function keys.

13. Software:
Free Programming Software The control program can be downloaded directly, with the use of the LCD panel, into a MiniSuperPLC unit. With more complicated control schemes the use of an ancillary computer, loaded with SUPER LOGIC software, is recommended. The control program can then be written into the memory of the MiniSuperPLC is a very friendly human-PLC interface programming software. It can edit the function diagrams and also can analogously run the written program. It provides an off-line testing function to the user. This feature overcomes much of the possible inconveniences normally experienced with on-line testing and commissioning. The system can be proven before being put into actual service. SUPER LOGIC will not only guide you to implement the editing of the control programs, but will also perform the real-time monitoring for the field environment and the operational conditions of MiniSuperPLC.